A process is currently executing in the background, please wait for the operation to complete. Once complete your screen will refresh automatically. One moment please...
         

DuPont™ Premium Stone Sealer

  • For heavy traffic and heavy use areas like countertops and backsplashes
  • Maximum protection against oil-, food-, and water-based stains
  • Penetrating sealer lasts up to 150% longer than regular sealer
  • Preserves stone’s natural color and shine
  • Interior and exterior use
  • Easy-to-use, water-based formula
  • Protects up to 5 years

Where to Use

Natural stone such as:

  • Marble
  • Granite
  • Limestone
  • Travertine
  • Sandstone
  • Flagstone
  • Saltillo
  • Slate and Bluestone

Directions for Use

Read entire label before using. Use only as directed.

Test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Be sure surface is clean and free of waxes and coatings. Sealer may be applied to damp surfaces 1 hour after standing water is removed. Surface temperature should be between 50°F and 80°F. Ensure that the area is well-ventilated during application and until the surface is dry. Keep children off of treated surface until it is dry.

  • Mask off and protect any surfaces not intended to be treated.
  • Apply sealer evenly and liberally using a paint pad, roller or brush. DO NOT APPLY PRODUCT WITH A SPRAYER.
  • Allow sealer to penetrate surface for 15–30 minutes while spreading excess sealer over entire area for even penetration. Remove excess sealer by wiping surface thoroughly with clean, dry towels.
  • Apply second coat as needed for porous, absorbent surfaces 30–40 minutes after first coat, following directions in steps 2–3.
  • 15–30 minutes after final application, wipe entire surface with clean, dry towels to remove any excess sealer. To remove any residue, reapply a thin coat of sealer, wait 2–3 minutes, then rub lightly with a white nylon pad. Wipe again thoroughly with clean, dry towels.
  • A full cure is achieved after 24–72 hours. Foot traffic may begin in 6–8 hours. If needed sooner, cover floor with red rosin paper to protect it until full cure is achieved.
  • Clean tools used during application with water.
Note: Above instructions are for reference purposes only. Please follow label directions on back of actual product.

Available Sizes & Coverage

  • Quart: 15-100 sqft
  • Gallon: 60-400 sqft

Expected Wear

3-5 years on interior surfaces and 1-3 years on exterior surfaces.

Product Performance Guarantee

Learn About Our Product Performance Guarantee »

Product Information Downloads

There are no records to display

P r o c e s s i n g . . .